Posts Tagged ‘denture relines’
Denture reline
Denture Reline
After a new denture has been inserted, it ought to retain in the mouth quite nicely due to the fact that the shape of the inside of the denture base conforms closely to the shape of the gums. (Please note that good retention or suction of the denture does not necessarily mean that the same denture is stable.) Unfortunately, the longer you wear the denture, the more your gums change underneath it and the looser it gets. In order to restore the retentive qualities of the denture, and to prevent the production of flabby gum tissue under it, you should have the denture professionally relined at least every two years.
There are actually three types of denture relines: hard, soft and temporary.
Hard denture reline
This is the kind of reline that should be done on all full dentures every two years. The dentist removes some of the plastic from the inside of the denture and fills the denture with a soft material (think of soft putty) which, when replaced in the mouth, conforms to the contours of the tissues, then hardens to a rubbery consistency. When the denture is removed, the denture now contains an accurate impression of the shape of the gums. The denture is sent to the lab, and the impression material is replaced with pink, hard acrylic in exactly the same shape as the original impression material. When returned, the denture now conforms to the contours of your mouth and should make maximum contact with the tissues producing maximum suction. In our office, the impression is scheduled for first thing in the morning. The patient goes home without the denture, but returns later the same day (usually early afternoon) for the insert (fitting appointment).
Soft denture reline
Occasionally, a patient finds that he cannot wear the denture because his gums are too tender, and he keeps getting sore spots. In cases where the patient is unable to wear ordinary dentures because of tender gums, the denture can be relined with a material that remains somewhat pliable for a year or two before it needs replacement. The consistency of this material can range from waxy to hard rubber, and is generally less likely to give the patient sore spots than ordinary pink acrylic.
Unfortunately, by the time that a patient resorts to a soft reline material to make the denture wearable, it usually means that factors other than simple sore spots are partly to blame for the difficulties that the patient is experiencing wearing the dentures. These could include an overbuilt denture or a resorbed ridge which is so unstable that the patient must keep constant force on the teeth to keep them in place. Both of these conditions can be corrected, sometimes with less expensive simple surgery or sometimes with much more expensive implant retained dentures.
Temporary denture relines (Therapeutic relines)
Frequently, by the time a patient with an old denture finally shows up at the dentist’s office looking for a new denture, the dentures have not been serviced for such a long time that the gums are in terrible condition. They may be red, swollen and quite misshapen. Relining the old denture, or building a new one using impressions taken while the gums are in such poor condition would lead to a denture that would simply perpetuate the problem with the new appliance.
When faced with situations like this, a dentist will frequently resort to a temporary, or palliative (medicated) reline material to allow the inflammation to subside. This reline makes the denture fit much more tightly, and is usually soft and pliable. It will not last more than a few months, but the patient wears it for a few weeks until the gums return to a more normal state. After this happens, then the patient is ready for his new denture or hard reline.
Denture Reline
Denture Reline Instructions
A denture reline is required when bone and tissue of the mouth begin to shrink due to post-immediate dentures, tooth loss, bone loss in the upper and lower jaw, weight loss, illness, disease or aging. The procedure should be done periodically to increase the stability of the denture and to prevent more bone loss, sore gums, and overlapping of the soft tissue under the palate.
- A denture reline can help to shape and model the face, accommodating the changes that occur due to bone deterioration. An uneven occlusal plane (how teeth and dentures fit together) can cause an improper fit, immense pain due to ulcerations, swelling, speech problems, difficulty chewing, and continued bone erosion. It also can cause the denture to hit in the wrong place or at the wrong time. Surgery may be necessary to remove the excess soft tissue of the gums and palate that has overgrown in folds underneath the denture and around the rim. A dental professional may be able to fix the overgrowth problem by performing tissue conditioner treatments. Dental professionals recommend that a denture reline be performed every three to five years to ensure a proper fit, prevent movement, and keep the wear of the ridge to a minimum. During a chair-side denture reline, the dentist grinds away the denture’s pink acrylic that contacts the gums in order to custom fit the acrylic base to the shape of the gums and bones. For a laboratory denture reline, the dentist uses impression material to make an accurate representation of the underlying tissue. The impression is then sent to a laboratory, where new acrylic is molded to the old denture in basically the same manner as the original, manufactured denture.
Benefits and Misconceptions
- A self-cure acrylic used during the chair-side denture reline is not as durable and hard as a laboratory-processed acrylic. For patients whose gums are swollen or sensitive, the softer material can provide better comfort. The chair-side denture reline is usually a quick process. The patient may have to wait only one day to get the plates back from the dentist. A laboratory denture reline produces a more precise impression, but the patient has to wait longer to receive their plates. The fabrication process during manufacturing is important in the proper fit of dentures. Improperly fitted dentures can result from the curing process. The most popular fabrication process, IVOCAP, results in only a .01 shrinkage, which ensures a more comfortable-fitting denture. Home denture reline kits are recommended only for temporary solutions until a patient can see his dentist. Before a reline procedure, a dental professional can advise whether or not the bite position, the condition of existing teeth, and the acrylic base are in good enough condition for a reline to be performed.



